How to Fix Bad Sectors In Hardisk

Bad sectors or bad blocks is to use a technical term that describes an area on your hard disk is damaged. Physically bad sector occurs because of damage to the disk plate hardware that can occur due to dust disk, hard drop, hard impact, and so on. While the software bad sectors can occur when the disk is busy all of a sudden the computer off, for example due to power failure. If damage is caused by hardware such as the friction that occurs on your hard disk so the disk can not be repaired. If the damage caused by the software that installed it can still be improved.

# 1. How to Fix Bad Sectors In Hard drives with a Windows Program

Internally the actual windows have simple tools that include the Windows operating system. The trick is;

    Double-click on [My Computer] to open a new window.
    Select the disk that you want to diagnose and repair.
    Right click on the disk / drive and select [Properties].
    Select the [Tools].
    Click on the [Check Now] under Error Checking Status.
    Depending on your Windows version, select one of [Thorough] or [Scan for and Attempt Recovery of Bad Sectors]
    Click [Start] and wait until the process is complete.
    Once completed, you should restart the computer.

# 2. How to Fix Bad Sectors In Hardisk with some tools

There are several tools that applications can use to fix the bad sectors of damaged hard drive software. In this article I was just introduced tools and please learn how to use it. Dimaksuda tool that is:

HDD LLF Low Level Format Tool

Before using the tool HDD LLF Low Level Format Tool is make sure the necessary data in a backup first. This is because the tool in question will clean up the data that is private or confidential permanently. Low level format program is a tool that works well to remove all partition information, data and information in the hard drive bad sectors on the damaged section. After running this tool is the condition of the hard drive will be completely clean as the condition was first used.

See also : How to Fix BOOTMGR is Missing Windows 7


Here are the steps to use the HDD Low Level Format Tool:

Download HDD Low Level Format program in http://hddguru.com/software/HDD-LLF-Low-Level-Format-Tool/
Install and run the program HDD Low Level Format tools so that the display appears as below:
Select the hard drive will be formatted, then click [Continue].
Click the [LOW-LEVEL FORMAT] then click [FORMAT THIS DEVICE]
Wait until the process is complete, the process will usually take a while so please mats and drinking his coffee. HDD Low Level Format Tool in addition to the hard drive (SATA, IDE or SCSI), it could be to format the flash, Flash Card et al.

Bad Block Recovery Softwares from Vendor Harddisk

Some software vendors issue a hard drive / diagnostic tool for hard disk analysis and maintenance, such as:

Fujitsu IDE Low level Format Utility. Software to fix bad sector hard drive from Fujitsu, can be downloaded at: www.fujitsu-europe.com/support/disk/software/erase.zip
Seagate's Seatools for Windows and Seagate's Seatools for DOS. Diagnostic Tools from Seagate that can be used to brand the hard drive Seagate, Maxtor hard drive or from another vendor, can be downloaded at: http://www.seagate.com/www/en-us/support/downloads.
Western Digital Data Lifeguard Diagnostics. Are tools for maintenance and repair hard drive, specifically for the hard disk from Western Digital you can download at: http://www.softpedia.com/get/System/Hard-Disk-Utils/Western-Digital-DLG-Diagnostics.shtml

So How to Fix Bad Sectors In Hardisk, hopefully can help and hopefully you've never experienced this.

Related Posts by Categories